Cerámica Wiki


: Vaciado por colada. Técnica que consiste en introducir la barbotina dentro de un molde, este puede ser tallado, de cerámica o más normal de escayola, el molde absorbe el agua de la barbotina, y a un tiempo determinado se vacía el sobrante. (colada de barbotina)

Slipcasting is a technique for the mass-production of pottery, especially for shapes not easily made on a wheel. A liquid clay body slip (usually mixed in a blunger) is poured into plaster moulds and allowed to form a layer, the cast, on the inside cavity of the mould. In a solid cast mould, ceramic objects such as handles and platters are surrounded by plaster on all sides with a reservoir for slip, and are removed when the solid piece is held within. For a hollow cast mould, once the plaster has absorbed most of the liquid from the outside layer of clay the remaining slip is poured off for later use. The cast piece is removed from the mould, "fettled" (trimmed neatly) and allowed to dry. This produces a greenware piece which is then dried before firing, with or without decoration and glaze. The technique is suited to the production of complex shapes, and is commonly used for sanitary ware, such as toilets and basins, and smaller pieces like figurines and teapots. The technique can also be used for small scale production runs or to produce limited editions of objects.

The French for slip is barbotine ("Coulée en barbotine" is slipcasting), and "barbotine pottery" is sometimes used for 19th century French and American pottery with added slipcast decoration.

External links[]

Esta página tiene contenido de Wikipedia. El Artículo original es Slipcasting. La lista de autores la puedes ver en Historial. El texto de Wikipedia esta disponible bajo Licencia Creative Commons Atribución/Compartir-Igual 3.0.